DELL EMC D-RP-DY-A-24 Real Exam Questions
The questions for D-RP-DY-A-24 were last updated at Dec 23,2024.
- Exam Code: D-RP-DY-A-24
- Exam Name: Dell RecoverPoint Deploy Achievement
- Certification Provider: DELL EMC
- Latest update: Dec 23,2024
You are adding a VMAX array to a RecoverPoint/CL environment.
What needs to be done?
- A . Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to the production host initiator.
- B . Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add the RPA initiator and port groups to the masking view.
- C . After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to tag all volumes that RecoverPoint is masked to C including the production and copy volumes.
- D . Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs.
Which virtualization solution components are supported by RecoverPoint?
- A . Hyper-V, VMware vCenter monitoring, VMware SRM
- B . Hyper-V only
- C . VMware vCenter monitoring only
- D . VMware SRM only
What is used when more performance is needed than a single RPA can provide for asynchronous replication?
- A . Distributed Consistency Groups
- B . Journal compression
- C . Fibre Channel connections
- D . Multi-cluster copies
A customer has three VMAX arrays and one VNX array fronted by an EMC VPLEX. They want to use RecoverPoint to protect their environment.
How many licenses, of which type, would be required for their environment?
- A . 1 EX license only
- B . 4 EX licenses
- C . 5 EX licenses
- D . 1 SE license and 1 EX license
Which RecoverPoint family is licensed per array and array capacity?
- A . RecoverPoint/EX only
- B . RecoverPoint/SE
- C . RecoverPoint/CL only
- D . RecoverPoint/EX and RecoverPoint/CL
When determining the journal volume size, which parameters must be considered?
- A . Rate of change Data set to be replicated Number of snapshots to retain
- B . Rate of change Percentage of sequential writes RPO/RTO
- C . Number of snapshots to retain Rate of change Consistency Group type
- D . Number of Consistency Groups RPO/RTO Network type
What are key use cases for RecoverPoint?
- A . Disaster Recovery, Operational Recovery, and Data Migration
- B . Disaster Recovery and Operational Recovery only
- C . Disaster Recovery and Data Migration only
- D . High Availability Solution Implementation
System events can be copied to the clipboard from which Unisphere for RecoverPoint view?
- A . RecoverPoint Dashboard
- B . Recovery
- C . RPA Clusters
- D . Admin
A company with a DR site connected with a 2 Gbps FC link has three vRPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized.
What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?
- A . Replace the vRPAs with physical RPAs and start using a Distributed Consistency Group
- B . Add two more vRPAs to the Primary site and divide the Consistency Group into four segments
- C . Divide the Consistency Group into two segments and start using Distributed Consistency Groups
- D . Add two RPAs to the Primary site as well as the secondary site
Which journal action available in Unisphere for RecoverPoint will NOT result in a full sweep synchronization and the loss of all history in the existing journal?
- A . Add a journal volume
- B . Remove a journal volume
- C . Expand a journal volume
- D . Reduce a journal volume