DELL EMC D-PE-OE-23 Real Exam Questions
The questions for D-PE-OE-23 were last updated at Nov 20,2024.
- Exam Code: D-PE-OE-23
- Exam Name: Dell Technologies PowerEdge Operate 2023
- Certification Provider: DELL EMC
- Latest update: Nov 20,2024
A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?
- A . Configure servers to access the remote firmware repository
- B . Enable the Match Firmware of Replaced Part setting in the system BIOS
- C . Install and configure a repository manager
- D . Enable the Collect System Inventory On Restart (CSIOR) attribute
Which two iDRAC license editions support enabling the Lockdown Mode feature? (Select 2)
- A . iDRAC Basic
- B . iDRAC Datacenter
- C . iDRAC Express
- D . iDRAC Enterprise
A technician resets the iDRAC but when they attempt to log back in to the iDRAC is offline.
Why is the iDRAC offline?
- A . DRAC has reset to the default IP address of 192.168.0.120
- B . Technician must use iDRAC Direct to enable the iDRAC network
- C . iDRAC is still in the reset process
- D . Technician must move the iDRAC network cable back to the iDRAC dedicated NIC
A user has a number of PowerEdge servers and installs OME on a remote system to monitor the servers. When attempting to discover one of the servers, the discovery process is unsuccessful. The user accesses the Troubleshooting tool to establish that the communication pathway is correct.
After entering the server iDRAC IP address, which network protocol should be selected to communicate with the iDRAC?
- A . SNMP
- B . IPMI
- C . In-Band
- D . WS-MAN
A technician needs to connect a server to a network but the network switch has only two available network ports so only two network cables can be connected. The user needs as much bandwidth as possible for their workload so the two network cables need to connect to LOM1 and LOM2.
At some point in the future a new network switch will enable additional cables to be used. The technician wants to satisfy the user requirements yet still be able to access the iDRAC without having to reconfigure the iDRAC once new cables are installed in the iDRAC Dedicated NIC.
What is the best way to configure the iDRAC?
- A . Use a splitter cable in one of the network switch ports to connect the same cable to both LOM1 and the iDRAC dedicated NIC
- B . Use a splitter cable in one of the network switch ports to connect the same cable to both LOM1 and LOM2 with the second network cable connecting to the iDRAC dedicated NIC
- C . Set up a dedicated NIC with LOM1 as the NIC selection
- D . Set up a shared NIC with LOM1 as the NIC selection with Auto Dedicated NIC selected
A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials.
How could the technician change the iDRAC password?
- A . SupportAssist Enterprise
- B . iDRAC Web GUI
- C . OpenManage Server Administrator
- D . Virtual Console; press F2 after rebooting system
A technician needs to troubleshoot a server. The OS was operational. After an untrained person accesses the System Setup utility on the server, the OS now fails to load.
The technician reboots the server, selects F2, accesses the System Setup utility, and selects System BIOS. The technician needs to verify items in the System BIOS settings before reloading the OS.
Which two items should the technician verify? (Choose two.)
- A . Boot Settings > Boot Option Settings > Boot Sequence
- B . Device Settings > Boot Sequence
- C . Integrated Devices > OS Watchdog Timer
- D . Boot Settings > Boot Mode
A technician is tasked to perform a RAID Level Migration (RLM) of a RAID 5 array to a RAID 6 array. They back up data and look in iDRAC Storage and find that the current RAID 5 array is sliced into two virtual disks.
What should the technician do to achieve the desired RAID level?
- A . Reboot and press Ctrl-R to complete RAID migration
- B . Use iDRAC GUI under Storage Configuration to delete the arrays and recreate the new RAID 6 array
- C . Open the OpenManage Enterprise GUI, delete the arrays, and recreate the new RAID 6 array
- D . Use SupportAssist Enterprise to complete RAID migration
A technician is tasked to perform a RAID Level Migration (RLM) of a RAID 5 array to a RAID 6 array. They back up data and look in iDRAC Storage and find that the current RAID 5 array is sliced into two virtual disks.
What should the technician do to achieve the desired RAID level?
- A . Reboot and press Ctrl-R to complete RAID migration
- B . Use iDRAC GUI under Storage Configuration to delete the arrays and recreate the new RAID 6 array
- C . Open the OpenManage Enterprise GUI, delete the arrays, and recreate the new RAID 6 array
- D . Use SupportAssist Enterprise to complete RAID migration
SPECIAL INSTRUCTIONS
The remaining Part1 questions are associated with four case studies that describe various environments or settings. Each case study appears on its own display screen. Questions for each case study will appear on separate display screens. When displaying a question, you can easily review the related case study by clicking on the ‘Review Case Study’ icon shown below:
Case Study 5 – Refer to the Exhibit.
Backing up data from a Dell EMC Isilon cluster exceeds the company’s backup window. Because the company has a large amount of data with a continuous high growth rate, they want to change their backup strategy. The Gen 6 Isilon cluster consists of 24 nodes.
Their current backup strategy is an NDMP three-way backup performing weekly full backups to tape and incremental backups each night. The strategy uses Dell EMC Net Worker. The DMA uses Include paths to specify what data to backup. All data on the cluster must remain accessible.
The company’s IT team is now looking for a method to increase the performance of their backups. After some investigations, you notice that the backup job quiesces the file system. This is creating lock contention issues on open files and not allowing users full access to data when the backup job runs.
What advice should be provided to the team to eliminate lock contention and allow full access to users?
- A . Create a cron job to remove all locks before each backup.
- B . Add A100 Backup Accelerators and configure for three-way NDMP
- C . Stop using an NDMP-based backup strategy.
- D . Enhance the backup strategy using snapshots for backups.