DELL EMC D-PDC-DY-23 Real Exam Questions
The questions for D-PDC-DY-23 were last updated at Nov 20,2024.
- Exam Code: D-PDC-DY-23
- Exam Name: Dell PowerSwitch Data Center Deploy 2023
- Certification Provider: DELL EMC
- Latest update: Nov 20,2024
What is an advantage of UFD?
- A . Reduces connectivity loss.
- B . Detects the loss of downstream connectivity.
- C . Reduces network complexity.
- D . Prevents the loss of upstream connectivity.
What does an ABR do with a Type 7 LSA it receives from an attached NSSA?
- A . It translates the Type 7 to a Type 5, and floods the LSA
- B . Nothing, since Type 7 originated external routing information is rejected by an ABR
- C . It floods the Type 7 to the rest of the OSPF domain
- D . It summarizes the information in the Type 7 LSA in a new Type 3 LSA
What is the default transmission interval of an LLDPDU in SmartFabric OS10?
- A . 2
- B . 10
- C . 20
- D . 30
When installing OS10 on a switch from a USB drive, what format is used for the file system?
- A . HFS+
- B . FAT32
- C . NTFS
- D . HFS
A network administrator has to configure a virtual IP address using VRRP on interface VLAN 100 within OS10.
What are the correct steps to accomplish this?
- A . OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip address 10.0.100.2/24
OS10(conf-if-vl-100)# vrrp-group 256
OS10(conf-vlan100-vrid-256)# virtual-address 10.0.100.1 - B . OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip address 10.0.100.2/24
OS10(conf-if-vl-100)# standby-group 250
OS10(conf-vlan100-vrid-250)# virtual-address 10.0.100.1 - C . OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip address 10.0.100.1/24
OS10(conf-if-vl-100)# vrrp-group 250
OS10(conf-vlan100-vrid-250)# virtual-address 10.0.100.2 - D . OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip address 10.0.100.1/24
OS10(conf-if-vl-100)# standby-group 256
OS10(conf-vlan100-vrid-256)# standby-address 10.0.100.2
ACL’s have which two (2) actions?
- A . Redistribute or forward
- B . Forward or erase
- C . Permit or deny
- D . Modify or drop
Which multicast address is used by all OSPF routers?
- A . 239.0.0.4
- B . 239.0.0.6
- C . 224.0.0.5
- D . 224.0.0.6
A network administrator wants to limit the amount of bandwidth that video traffic can consume.
Which type of policy map should be used?
- A . Queuing
- B . It is not possible to limit bandwidth using policy maps
- C . Control plane
- D . Application
What do bridge protocol data units provide?
- A . Special data frames to exchange STP information
- B . Metadata transferred connecting two network bridges
- C . Configuration data exchanged during a VLTi setup
- D . Bridge information part of the LLDP protocol
A router must be configured to allow multiple multicast servers for the same group to be presented only to ports where active listeners reside. Each listener may exclude non-preferred servers.
What is the minimum multicast configuration level required on the router?
- A . IGMPv2 with snooping PIM-SSM
- B . IGMPv3 with snooping PIM-SSM
- C . IGMPv3 with snooping PIM-SM
- D . IGMPv3 without snooping PIM-SSM