Cisco 300-410 Real Exam Questions
The questions for 300-410 were last updated at Nov 21,2024.
- Exam Code: 300-410
- Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Certification Provider: Cisco
- Latest update: Nov 21,2024
Refer to the exhibit.
An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available.
How is this issue resolved?
- A . Use the icmp-echo command to track both default routes
- B . Use the same AD for both default routes
- C . Start IP SLA by matching numbers for track and ip sla commands
- D . Start IP SLA by defining frequency and scheduling it
Refer to the exhibit.
An engineer is trying to block the route to 192.168.2.2 from the routing table by using the configuration that is shown. The route is still present in the routing table as an OSPF route.
Which action blocks the route?
- A . Use an extended access list instead of a standard access list.
- B . Change sequence 10 in the route-map command from permit to deny.
- C . Use a prefix list instead of an access list in the route map.
- D . Add this statement to the route map: route-map RM-OSPF-DL deny 20.
Refer to the exhibit.
Network operations cannot read or write any configuration on the device with this configuration from the operations subnet.
Which two configurations fix the issue? (Choose two.)
- A . Configure SNMP rw permission in addition to community ciscotest.
- B . Modify access list 1 and allow operations subnet in the access list.
- C . Modify access list 1 and allow SNMP in the access list.
- D . Configure SNMP rw permission in addition to version 1.
- E . Configure SNMP rw permission in addition to community ciscotest 1.
Refer to the exhibit.
R2 is a route reflector, and R1 and R3 are route reflector clients. The route reflector learns the route to 172.16.25.0/24 from R1, but it does not advertise to R3.
What is the reason the route is not advertised?
- A . R2 does not have a route to the next hop, so R2 does not advertise the prefix to other clients.
- B . Route reflector setup requires full IBGP mesh between the routers.
- C . In route reflector setup, only classful prefixes are advertised to other clients.
- D . In route reflector setups, prefixes are not advertised from one client to another.
Refer to the exhibit.
Which subnet is redistributed from EIGRP to OSPF routing protocols?
- A . 10.2.2.0/24
- B . 10.1.4.0/26
- C . 10.1.2.0/24
- D . 10.2.3.0/26
Which Cisco VPN technology can use multipoint tunnel, resulting in a single GRE tunnel interface on the hub, to support multiple connections from multiple spoke devices?
- A . DMVPN
- B . GETVPN
- C . Cisco Easy VPN
- D . FlexVPN
While working with software images, an engineer observes that Cisco DNA Center cannot upload its software image directly from the device.
Why is the image not uploading?
- A . The device must be resynced to Cisco DNA Center.
- B . The software image for the device is in install mode.
- C . The device has lost connectivity to Cisco DNA Center.
- D . The software image for the device is in bundle mode
A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap.
Which command allows the logging on the switch to show the time of the flap according to the clock on the device?
- A . service timestamps log uptime
- B . clock summer-time mst recurring 2 Sunday mar 2:00 1 Sunday nov 2:00
- C . service timestamps log datetime localtime show-timezone
- D . clock calendar-valid
Refer to the exhibit.
Why is user authentication being rejected?
- A . The TACACS+ server expects “user”, but the NT client sends “domain/user”.
- B . The TACACS+ server refuses the user because the user is set up for CHAP.
- C . The TACACS+ server is down, and the user is in the local database.
- D . The TACACS+ server is down, and the user is not in the local database.
Refer to the exhibit.
AAA server 10.1.1.1 is configured with the default authentication and accounting settings, but the switch cannot communicate with the server.
Which action resolves this issue?
- A . Match the authentication port
- B . Match the accounting port
- C . Correct the timeout value.
- D . Correct the shared secret.